NCSL International Canadian Conference 2026: A Lab Leader's Guide to Montréal

Robotic arm moving a sample vial from a rack to a lab analyzer

By Trucision staff. An independent guide based on the official NCSL International conference pages as of November 12, 2026.

Key takeaways: The 2026 NCSL International Canadian Conference runs November 17–19 at the National Research Council Canada (NRC) Royalmount campus in Montréal. The program centers on five themes: digital calibration certificates, decision rules under ISO/IEC 17025, moving lab software off spreadsheets, connected instruments and data provenance, and accreditation and competence.

The NCSL International Canadian Conference is the main Canadian gathering of the NCSLI measurement community: calibration labs, national metrology institutes, accreditation bodies and instrument makers. If you run a testing or calibration lab, the program is a good map of where lab operations are heading.

Quick facts

  • Dates: November 17–19, 2026
  • Venue: NRC Canada – Montréal – Royalmount, 6100 Royalmount Avenue, Montréal, QC H4P 2R2
  • Day 1 (Tuesday, Nov 17): four half-day tutorials, then the conference banquet at 6:00 PM at Restaurant Bar Focaccio in Dorval (included with registration)
  • Day 2 (Wednesday, Nov 18): technical sessions and exhibitor time
  • Day 3 (Thursday, Nov 19): technical sessions
  • Organizer: NCSL International

Day 1: four tutorials worth the early start

The tutorials are practical and aimed at people who run or audit labs day to day.

  • Internal Auditing in a Metrology Laboratory, Andy Oldershaw (NRC). Auditing fundamentals under ISO 19011:2018, mapped to ISO/IEC 17025:2017, with a focus on how to audit metrological traceability.
  • Introduction to Relative Humidity Calibration, Michael Boetzkes.
  • Metrological Traceability, Tracing the Path to Reliable Measurements, Andy Oldershaw (NRC).
  • Measurement Uncertainty Made Easy, NRC.

Five themes from the technical program

1. Calibration data is becoming machine-readable

Christophe Boubay (Beamex) opens Day 2 with Digital Calibration Certificates (DCC): A Foundation for Digital Transformation in Metrology. His abstract makes the core point: certificates are still designed for people to read, while data now needs to move between instruments, labs, asset systems and enterprise software.

2. Decision rules still cause confusion

Jim Salsbury (Mitutoyo) covers Decision Rules and Statements of Conformity. ISO/IEC 17025:2017 requires labs to use decision rules but does not prescribe which ones. That gap shows up in audits and in customer disputes over pass/fail calls.

3. Labs are leaving spreadsheets behind

Sajiv Perera (Measurement Canada) presents An extensible platform for in-house lab software – progress on thermometry, on how Measurement Canada's labs are moving from spreadsheets to cloud-enabled software. Mitchell Jones (IndySoft) follows on Day 3 with Why Specialized Calibration & Asset Management Software Matters.

4. Connected instruments and data provenance

Ryan Kershaw (WIKA) speaks on Industry 4.0 and IIoT: What it Means for the Calibrated and the Calibrators. Ryan White (NRC) presents PRISMet, linking quantum measurement standards to traceability through FAIR digital provenance.

5. Accreditation and competence

Abdel Kassou (Standards Council of Canada) covers accreditation in Canada's quality infrastructure. Ema Gitej (CALA) presents Training with Effect: Building Competence in Calibration Laboratories.

Other sessions cover industrial mass metrology (Aaron Brookham, Mettler Toledo), time and the end of leap seconds (Claude Marceau, NRC), projecting future values of primary standards (Dr. Mahdi Yavarian, Guildline), traceable calibration for EV charging (Branislav Djokic, NRC) and dimensional metrology (Greg Reain, NRC). Fluke and Isotech sessions are still to be announced at the time of writing.

What this means for lab operations

Read together, the program describes one shift: measurement results are moving from documents people read to data that systems act on. A digital certificate is only useful if the receiving lab can ingest it. A decision rule is only defensible if it is applied the same way every time and recorded. A move off spreadsheets only pays off if traceability, uncertainty and audit trails come with it.

If you're attending

  • Book the Day 1 tutorials early. They are the most hands-on part of the program.
  • Pair the DCC session with the two software sessions. Together they show the full data path from instrument to certificate to asset system.
  • Bring your lab's current decision rule and ask how others document it.

FAQ

When and where is the 2026 NCSL International Canadian Conference?

November 17–19, 2026, at the National Research Council Canada – Montréal – Royalmount campus, 6100 Royalmount Avenue, Montréal, Quebec.

Who should attend?

Calibration and testing lab staff, quality and accreditation managers, metrology professionals and instrument makers working in the Canadian measurement community.

Is the banquet included?

Yes. The Tuesday, November 17 banquet at Restaurant Bar Focaccio in Dorval is included with conference registration.

Related reading

Free download: the show-floor question sheet

Going to Montréal? Get our one-page sheet of questions to ask speakers and exhibitors about digital certificates, decision rules and lab software, so you come home with answers you can use. Send me the question sheet.

Meeting at the show or can't make it? Trucision helps labs keep results, calibration state and quality records connected from instrument to certificate. Book a 30-minute call.

Trucision is not affiliated with NCSL International. For registration and the latest schedule, see the official program.

Get started

Find the right plan to modernizeyour product line

We work with OEM product and service leaders to identify the highest-value starting pointy- whether that’s a specific instrument line, a service tier launch, or a compliance gap. Most engagement scope in one session.
Name *
Company
Email *
Role
What are you working on ? *

Thanks!
Your form has been submitted.

Please complete all mandatory fields before submitting.